Terrier WP
Applied Terrier Wp
Product Features
• GPRS -4G LTE
• Handshake along with TimeStamp based data validation provided
• IoT Implementation over MQTT Protocol with TLS 1.2
• AES256 data encryption (Rotating Key Bank mechanism)
• Web based client application for IoT configurations
• MODBUS RTU (or) MODBUS TCP/IP support to connect with PLC’s or other devices
• Configurable data sending interval
• Remote Management System (RMS)
• Mobile SMS Utility
Product Description
Applied Terrier-WP IIoT Controller is designed and developed to connect to a PLC’s over Modbus TCP/IP (or) Modbus RTU to transmit the data via GPRS 4G LTE (MQTT with TLS1.2) to a cloud server. Terrier-WP automatically does this function when powered up and internet connection provided. Configuration of Terrier can be done using at web based client application.
| Technical Specification | ||||
| Controller | ARM Cortex-A7 1.2 GHz CPU | |||
| Internet Connectivity | GPRS – 4G LTE, Cat-4 / HSPA+, UMTS / EDGE, GSM, GPRS | |||
| Supply voltage range | 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max C | |||
| Power consumption | < 5 W | |||
| Operating temperature | -40 °C to 75 °C | |||
| Operating humidity | 10 % to 90 % non-condensing | |||
| Switch Input(Reset) | 1 | |||
| Protocol | MQTT & HTTP(S) | |||
| Security | TLS 1.2 along with AES256 data encryption to cloud server | |||
| Firewall | Pre-configured firewall rules can be enabled via the WebUI | |||
| Communication with other Devices | Modbus (RTU), Modbus TCP/IP (optional) | |||
| Antenna | 1 x SMA for LTE | |||
| Radiation Pattern | Nominally Omni directional Radiation Pattern | |||
| Data sending Interval | Configurable from 0 to 1000 sec | |||
| Dimensions (W x H x D) | 74.5 x 25 x 64.4 mm | |||
| RS485 | 1 x 6 pin terminal block for 2-wire or 4 wire interface | |||
| I/Os | 2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB145*2****) | |||
| USB | 1 x Virtual network interface via micro USB | |||
| Status LEDs | 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED | |||
| SIM | 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V | |||
| Power | 4 pin industrial DC power socket | |||
| RAM | 128 MB (50 MB available for userspace) | |||
| FLASH storage | 512 MB (200 MB available for userspace) | |||
| Operating system | RutOS (OpenWrt based Linux OS) | |||
| Configuration using Web Browser | ||||
| Handshake Configuration | ||||
| Device Serial Number | Unique ID automatically read from device memory/Static | |||
| SIM Serial Number | Unique ID automatically read from the sim card provider | |||
| IIoT Serial Number | Unique IIoT Serial Number assigned to the device manually | |||
| Mobile Number | Unique SIM Mobile Number configured to the device manually | |||
| Security Configuration | ||||
| TLS 1.2 | Upload TLS Certificate files & AES Key & Salt files | |||
| Communication Configurations | ||||
| MQTT | Configuring MQTT Publisher and Broker parameters | |||
| MODBUS | Configuring MODBUS RTU (or) TCP/IP parameters | |||
Descriptions
Product Features
• GPRS -4G LTE
• Handshake along with TimeStamp based data validation provided
• IoT Implementation over MQTT Protocol with TLS 1.2
• AES256 data encryption (Rotating Key Bank mechanism)
• Web based client application for IoT configurations
• MODBUS RTU (or) MODBUS TCP/IP support to connect with PLC’s or other devices
• Configurable data sending interval
• Remote Management System (RMS)
• Mobile SMS Utility
Product Description
Applied Terrier IIoT Controller is designed and developed to connect to a cloud server via Ethernet(TCP/IP) or GPRS. Terrier automatically does this function when powered up and internet connection provided. Configuration of Terrier can be done using at web browser.
Specifications
| Technical Specification | ||||
| Controller | ARM Cortex-A7 1.2 GHz CPU | |||
| Internet Connectivity | GPRS – 4G LTE, Cat-4 / HSPA+, UMTS / EDGE, GSM, GPRS | |||
| Supply voltage range | 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max C | |||
| Power consumption | < 5 W | |||
| Operating temperature | -40 °C to 75 °C | |||
| Operating humidity | 10 % to 90 % non-condensing | |||
| Switch Input(Reset) | 1 | |||
| Protocol | MQTT & HTTP(S) | |||
| Security | TLS 1.2 along with AES256 data encryption to cloud server | |||
| Firewall | Pre-configured firewall rules can be enabled via the WebUI | |||
| Communication with other Devices | Modbus (RTU), Modbus TCP/IP (optional) | |||
| Antenna | 1 x SMA for LTE | |||
| Radiation Pattern | Nominally Omni directional Radiation Pattern | |||
| Data sending Interval | Configurable from 0 to 1000 sec | |||
| Dimensions (W x H x D) | 74.5 x 25 x 64.4 mm | |||
| RS485 | 1 x 6 pin terminal block for 2-wire or 4 wire interface | |||
| I/Os | 2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB145*2****) | |||
| USB | 1 x Virtual network interface via micro USB | |||
| Status LEDs | 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED | |||
| SIM | 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V | |||
| Power | 4 pin industrial DC power socket | |||
| RAM | 128 MB (50 MB available for userspace) | |||
| FLASH storage | 512 MB (200 MB available for userspace) | |||
| Operating system | RutOS (OpenWrt based Linux OS) | |||
| Configuration using Web Browser | ||||
| Handshake Configuration | ||||
| Device Serial Number | Unique ID automatically read from device memory/Static | |||
| SIM Serial Number | Unique ID automatically read from the sim card provider | |||
| IIoT Serial Number | Unique IIoT Serial Number assigned to the device manually | |||
| Mobile Number | Unique SIM Mobile Number configured to the device manually | |||
| Security Configuration | ||||
| TLS 1.2 | Upload TLS Certificate files & AES Key & Salt files | |||
| Communication Configurations | ||||
| MQTT | Configuring MQTT Publisher and Broker parameters | |||
| MODBUS | Configuring MODBUS RTU (or) TCP/IP parameters | |||