previous arrow
next arrow
Slider
Terrier

Terrier

Product Features: • GPRS -4G LTE • TimeStamp provided • IoT Implementation •...
Terrier + GPRS

Terrier + GPRS

Product Features: • GPRS -4G LTE • TimeStamp provided • IoT Implementation •...
Terrier + WIFI

Terrier + WIFI

Product Features: • Wifi Protocol: 802.11 b/g/n • Wifi Supports: WPA/WPA2...
BEAGLE HL

BEAGLE HL

Product Features: • Ethernet speed: 10Mbps • DHCP enabled • IoT Implementation...
Relay Module – 12 Channel x 10A Each

Relay Module – 12 Channel x 10A Each

Product Features: • Relay module with 12Channel • Freewheeling diode across...
Breather Controller With TimeStamp Datalog

Breather Controller With TimeStamp Datalog

Product Features: • Electrical direct controls using Relays • Web browser...
Communication Module – RS232C to IEC61850 Converter

Communication Module – RS232C to IEC61850 Converter

Product Features: • 8 bit Asynchronous Serial communication • Configurable...
Applied Photo Diode

Applied Photo Diode

Product Features: • High sensitivity • Stability • UV/Blue enhanced • Fluorescent...
RS485 Relay Module- 4 Way

RS485 Relay Module- 4 Way

Product Features: • Electrical direct controls using Relays • Smooth touch...
RS485 Relay Module- 8 Way

RS485 Relay Module- 8 Way

Product Features: • Electrical direct controls using Relays • RS485 connectivity •...
Arc Detector with Coil Monitoring

Arc Detector with Coil Monitoring

Product Features: ARC100 E /ARC100 A • Electrical Direct Controls •...
Humidity Sensor

Humidity Sensor

Product Features: • Highest accuracy • Excellent protection against pollution •...
Vibration Sensor

Vibration Sensor

Product Features: • Highest accuracy • Excellent protection against pollution •...
4 Touch Keypad Module

4 Touch Keypad Module

Product Features: • Electrical direct controls using Relays • Smooth touch...
8 Touch Keypad Module

8 Touch Keypad Module

Product Features: • Electrical direct controls using Relays • RS485 connectivity •...
Transformer Dryout System

Transformer Dryout System

Product Features • Electrical direct controls using Relays • Backup the...
Tapchanger Filter System

Tapchanger Filter System

Product Features: • Electrical direct controls using Relays • Backup the...
  • Terrier
  • Terrier + GPRS
  • Terrier + WIFI
  • BEAGLE HL
  • Relay Module – 12 Channel x 10A Each
  • Breather Controller With TimeStamp Datalog
  • Communication Module – RS232C to IEC61850 Converter
  • Applied Photo Diode
  • RS485 Relay Module- 4 Way
  • RS485 Relay Module- 8 Way
  • Arc Detector with Coil Monitoring
  • Humidity Sensor
  • Vibration Sensor
  • 4 Touch Keypad Module
  • 8 Touch Keypad Module
  • Transformer Dryout System
  • Tapchanger Filter System
  • Terrier

    Product Features:

    • GPRS -4G LTE
    • TimeStamp provided
    • IoT Implementation
    • Web browser application
    • DHCP /Static enabled
    • Configurable data sending interval
    • Ethernet speed: 10Mbps

    Product Description:

    Applied Terrier IIoT Controller is designed and developed to connect to a PLC's over Modbus TCP/IP (or) Modbus RTU to transmit the data via Ethernet(TCP/IP) or GPRS to a cloud server. Terrier automatically does this function when powered up and internet connection provided. Configuration of Terrier can be done using at web browser.


    Technical Specifications

    Technical Specification: Applied Terrier
    Supply Voltage +24VDC SMPS
    Current Rating +24VDC max @200mA
    Operating Temperature - 45 to +60 deg C
    Humidity 20% to 85%
    Switch Input(Reset) 1
    Status LED Indication 4
    Communication Interface GPRS / Ethernet-TCP/IP
    Protocol MODBUS TCP/IP & MODBUS RTU
    Data Transfer(LTE) Uplink upto 50Mbps
    Downlink upto 100Mbps
    Antenna External PCB antenna
    Radiation Pattern Linear Polarization
    Data sending Interval Configurable(5 sec recommended)
    Board Dimension(LxW) 74x72 mm
    Connector 3.50 mm Pluggable connector
    Configuration using Web Browser
    Ethernet DHCP/Static
    IIoT Server IP(DNS) appliediiot .com/159.89.162.47
    IIoT Server Port 50000
    PLC Communication Parameters
    IP Static
    PORT 502
    Default Communication Parameters
    MAC Address 00-04-A3-A2-00-01
    Gateway 10.10.1.1
    Primary DNS 255.255.0.0
    Internet Protocol 10.10.200.253
  • Terrier + GPRS

    Product Features:

    • GPRS -4G LTE
    • TimeStamp provided
    • IoT Implementation
    • Web browser application
    • DHCP /Static enabled
    • Configurable data sending interval
    • Ethernet speed: 10Mbps

    Product Description:

    Applied Terrier IIoT Controller is designed and developed to connect to a cloud server via Ethernet(TCP/IP) or GPRS. Terrier automatically does this function when powered up and internet connection provided. Configuration of Terrier can be done using at web browser.


    Technical Specifications

    Technical Specification: Applied Terrier
    Supply Voltage +24VDC SMPS
    Current Rating +24VDC max @200mA
    Operating Temperature - 45 to +60 deg C
    Humidity 20% to 85%
    Switch Input(Reset) 1
    Status LED Indication 4
    Serial Communication RS 485/RS 232
    Communication Interface GPRS / Ethernet-TCP/IP
    Protocol MODBUS TCP/IP & MODBUS RTU
    Data Transfer(LTE) Uplink upto 50Mbps
    Downlink upto 100Mbps
    Antenna External PCB antenna
    Radiation Pattern Linear Polarization
    Data sending Interval Configurable(5 sec recommended)
    Board Dimension(LxW) 74x72 mm
    Connector 3.50 mm Pluggable connector
    Configuration using Web Browser
    Ethernet DHCP/Static
    IIoT Server IP(DNS) appliediiot .com/159.89.162.47
    IIoT Server Port 50000
    PLC Communication Parameters
    IP Static
    PORT 502
    Default Communication Parameters
    MAC Address 00-04-A3-A2-00-01
    Gateway 10.10.1.1
    Primary DNS 255.255.0.0
    Internet Protocol 10.10.200.253
  • Terrier + WIFI

    Product Features:

    • Wifi Protocol: 802.11 b/g/n
    • Wifi Supports: WPA/WPA2
    • WiFi mode station/softAP/SoftAP+station
    • Wake up and transmit packets in < 2ms
    • DHCP /Static enabled
    • Configurable data sending interval
    • Ethernet speed: 10Mbps
    • TimeStamp provided
    • IoT Implementation
    • Web browser application

    Product Description:

    Applied Terrier IIoT Controller is designed and developed to connect to a cloud server via Ethernet(TCP/IP) or WIFI. Terrier automatically does this function when powered up and internet connection provided. Configuration of Terrier can be done using at web browser


    Technical Specifications

    Technical Specification: Applied Terrier
    Supply Voltage +24VDC SMPS
    Current Rating +24VDC max @200mA
    Operating Temperature - 45 to +60 deg C
    Humidity 20% to 85%
    Switch Input(Reset) 1
    Status LED Indication 4
    Serial Communication RS 485/RS 232
    Communication Interface WIFI / Ethernet-TCP/IP
    Protocol MODBUS TCP/IP & MODBUS RTU
    Wifi Protocol : 802.11 b/g/n
    Frequency Range : 2.4G-2.5G (2400M-2483.5M)
    Antenna 2.4G PCB antenna
    Radiation Pattern Linear Polarization
    Data sending Interval Configurable(5 sec recommended)
    Board Dimension(LxW) 74x72 mm
    Connector 3.50 mm Pluggable connector
    Configuration using Web Browser
    Ethernet DHCP/Static
    IIoT Server IP(DNS) appliediiot .com/159.89.162.47
    IIoT Server Port 50000
    PLC Communication Parameters
    IP Static
    PORT 502
    Default Communication Parameters
    MAC Address 00-04-A3-A2-00-01
    Gateway 10.10.1.1
    Primary DNS 255.255.0.0
    Internet Protocol 10.10.200.253
  • BEAGLE HL

    Product Features:

    • Ethernet speed: 10Mbps
    • DHCP enabled
    • IoT Implementation
    • RS485 Serial communication < 2ms
    • Enocean 868Mhz
    • Sensor Based Lights Control
    • Night Mode Control
    • Energy Consumption Monitoring
    • Energy Saving
    • Omni-Directional Radiation Pattern

    Product Description:

    Applied Beagle IIoT Controller is designed and developed to interface with Slave devices such as Keypads and Sensors . Slave device is capable of being controlled by Master AIOHA/AIO411 controller through Rs485/wireless enocean. Device Live status is updated in Cloud Server through TCP/IP. AIOHA/AIO411 automatically does this function when powered up and internet connection provided.


    Technical Specifications

    Technical Specification:          Applied Beagle
    Supply Voltage +24VDC SMPS
    Current Rating +24VDC max @200mA
    Operating Temperature - 45 to +60 deg C
    Humidity 20% to 85%
    Switch Input(Reset) 1
    Protocol TCP/IP
    Serial Communication RS485
    Wireless Communication Enocean 868Mhz
    Data sending Interval Configurable
    Board Dimension(LxW) 74x72 mm
    Connector 3.50 mm Pluggable connector
    IIoT Web Browser
    Ethernet DHCP/Static
    IIoT Server IP(DNS) iiot.aaspl.net/68.183.95.37
    IIoT Server Port 40000
    Antenna Type Whip Antenna
    Radiation Type Omni-Direction
    Impedance 50 ohm
    Gain 3dBi
    Antenna Freq 868Mhz
  • Relay Module – 12 Channel x 10A Each

    Product Features:

    • Relay module with 12Channel
    • Freewheeling diode across relay coil for protection.
    • High switching power: 10A @ 250VAC
    • Coil power consumption: 360mW

    Product Description:

    Applied Relay Module is designed for switching high-current electrical loads such as both AC and DC. Each relay has NO and NC ports, easier to connect and control the connected devices.


    Technical Specifications

    Technical Specification:          Applied Relay Module
    Input Voltage +24VDC
    Coil resistance 1600 ohm
    Coil current 15mA
    Load Current rating 10A @ 250V AC max
    5A @ 24V DC max
    Operating Temperature -45 to +60 deg C
    Humidity 20% to 85%
    Relay Type Electromechanical SPDT
    Relay contact type NO & NC
    Protection Freewheeling diode across relay coil
    Relay Outputs 12
    LED Indication Green LED for input status
    Board Dimension(LxW) 145x72mm
    Casing Type DIN Rail casing
    Mounting Hole 4nos 4mm
    Connector 5.08mm Pitch screw type PCB terminals block
    3.5mm Pitch Connector
  • Breather Controller With TimeStamp Datalog

    Product Features:

    • Electrical direct controls using Relays
    • Web browser application .
    • RS485 connectivity
    • Ethernet speed: 10Mbps
    • Backup the parameters using Supercapacitor, when power is turned of
    • Datalog with Timestamp provided

    Product Description:

    Applied Breather controller is one of our products which is well designed and developed for the purpose of Transformer Breather Compartment's dryer application. ABR100 controls the drying ,regeneration using preset timers, input/output control relays. It also takes input from a humidity sensor for triggering the regeneration mode.


    Technical Specifications

    Technical Specification:          Applied Breather Controller
    Supply Voltage +24VDC SMPS
    Current rating +24VDC max @200mA
    Operating Temperature -45 to +60 deg C
    Humidity 20% to 85%
    Analog Input 4-20mA (or) 0-5V
    Switch Input 1
    Digital Inputs 2 (+24v DC)
    Status LED Indication 8
    Relay Outputs 8
    Relay Current Rating 8A/250VAC, Coil +24VDC
    Serial Communication RS485
    Protocol MODBUS RTU
    Power Backup Super capacitor
    Current Transformer LOAD current monitoring- PCB mount
    Load 1:Heater 1 0.14A 32W Resistive load
    Load 2:Heater 2 0.14A 32W Resistive load
    Load 3:Fan +24V DC Fan motor
    Load 4:Solenoid Valve 1 +24VDC
    Load 5:Solenoid Valve 2 +24VDC
    Load 6:Solenoid Valve3 +24VDC
    Load 7:Solenoid Valve 4 +24VDC
    Board Dimension(LxW) 120x108mm
    Connector 5.08mm Pitch Pluggable Connector
    2.54mm Pitch 34(17x2)PIN Bergstrip
    2.54mm Pitch 16PIN FRC
  • Communication Module – RS232C to IEC61850 Converter

    Product Features:

    • 8 bit Asynchronous Serial communication
    • Configurable baud rate & other Serial communication parameters
    • Optical performance of the Asynchronous Transfer Mode 100 Mb/s
    • Ethernet speed: 10 Mbps
    • Protocol: Modbus RTU to IEC-61850

    Product Description:

    Applied ACM100+SYNC 241 with Plug In Fiber ST is a RS232C to IEC61850 converter with Fibre Optic port or Plug In Ethernet RJ-45. Developed to be used with PLC connected on RS232C with Modbus Protocol. This module converts into IEC61850 Protocol, implementation for MMS Protocol application.


    Technical Specifications

    Technical Specification:          Applied Communication Module
    Supply Voltage +24VDC SMPS
    Current rating 90mA at +24vdc
    Operating Temperature - 20 to +70 deg C
    Humidity 5% to 90%
    5A @ 24V DC max
    Serial Communication RS232 to Fibre Optics/Ethernet
    RS485 to Fibre Optics/Ethernet(Optional)
    Protocol Modbus RTU to IEC-61850
    Reset Switch 1
    Board Dimension(LxW 120x72mm
    Connector 3.5mm Pluggable Connector
    2mm Pitch 16x2 berg Strip
    RTC 56bytes NV RAM & 3V CMOS battery for RTC power
    Voltage Requirements* 3.3V,2W
    LED Indication* Link-yellow & Activity- Green
    FO ST connector* To plug multi mode 1300nm Fiber
    Eth connector* RJ-45
    Fibre Cable* 62.5/125 μm & 50/125 μm multi mode fibre cable can be used
    Communication* upto 115.2 Kbps
    Casing Type DIN Rail casing & Metal sheet with powder coated
    Mounting Hole 4nos 4mmr
    Software ”EC CONNECT” for Configuration &
    ICD File generation for SCADA implementation
    Serial Communication Parameters(default)
    Baud Rate 9600 bps
    Data Bits 8
    Parity none
    Stop Bits 1
    Flow Control none
    IEC 61850 Parameters
    IEC 61850 For MMS Application
    IP Address Configurable

    NOTE: * indicates Spec details for SYNC241 Module

  • Applied Photo Diode

    Product Features:

    • High sensitivity
    • Stability
    • UV/Blue enhanced
    • Fluorescent detection

    Product Description:

    Applied APD100 is a highly sensitive to detect an Arc produced inside the Transformer. Sensing area 33.5 mm2 UV Silicon Photo diode converts Light energy into electrical energy, amplified by APD100.


    Technical Specifications

    Technical Specification:          Applied Photo Diode
    Supply Voltage +5VDC
    Current rating +5VDC max @5mA
    Dark Current 2 nAC
    Peak DC current 10mA
    Peak Wavelength 340 nm
    Operating Temperature - 45 to +60 deg C
    Humidity 20% to 85%
    Sensing Active area(LxW) 6.1 mm x 5.5mm
    Rise Time 0.6 us
    Responsivity 0.17 A/W
    Photo Current 10uA
    Analog output Range 0 to 4.5v
    Sensor Output 1
    Connector 5.08mm Pitch Screw Type
    Cable Thickness 0.5mm recommended
  • RS485 Relay Module- 4 Way

    Product Features:

    • Electrical direct controls using Relays
    • Smooth touch experience
    • RS485 connectivity
    • Load can be controlled by mobile application.
    • User can choose UPS connections to the particular load, remaining load works under EB
    • Coil Voltage : 12VDC

    Product Description:

    Applied RS485 Relay Module is designed & developed for operating multiple loads such as Lights ,fans & motors etc.. This Relay Module is capable of being controlled by AIOHA controllers through Rs485/wireless enocean alliance .


    Technical Specifications

    Technical Specification:          Applied RS485 Relay Module- 4 Way
    Power Supply Voltage 100-240VAC Universal input, 50hz
    Operating Temperature 0 to +60 deg C
    Humidity 20% to 85%
    Relay Outputs 4
    Relay Current Rating 8A/250VAC
    Resistive Loads Tungsten & Halogen light 500W
    Capacitive Loads LED & CFL 100W
    Inductive Loads Fan & Motor 65W
    Serial Communication RS485
    Protocol ModBus RTU
    Board Dimension(LxW) in mm 90x45
    Connector : 3.5mm Pitch Pluggable Connector
    Wireless Communication ENOCEAN-868MHz
    Serial Communication Parameters(default)
    Baud Rate 9600 bps
    Data Bits 8
    Parity none
    Flow Control none

    NOTE

    • Power Supply Voltage : 230VAC
    • Power cable is inserted into the Pluggable connector as per the letters printed on the board.
    • Excess stripping of wires will make shorts between two wires. So,strip out only necessary length of wires
  • RS485 Relay Module- 8 Way

    Product Features:

    • Electrical direct controls using Relays
    • RS485 connectivity
    • Load can be controlled by mobile application.
    • User can choose UPS connections to the particular loads, remaining loads works under EB
    • Coil Voltage : 12VDC

    Product Description:

    Applied RS485 Relay Module is designed & developed for operating multiple loads such as Lights ,fans & motors etc.. This Relay Module is capable of being controlled by AIOHA controllers through Rs485/wireless enocean alliance .


    Technical Specifications

    Technical Specification:          Applied RS485 Relay Module- 8 Way
    Power Supply Voltage 100-240VAC Universal input, 50hz
    Operating Temperature 0 to +60 deg C
    Humidity 20% to 85%
    Relay Outputs 8
    Relay Current Rating 8A/250VAC
    Resistive Loads Tungsten & Halogen light 500W
    Capacitive Loads LED & CFL 100W
    Inductive Loads Fan & Motor 65W
    Serial Communication RS485
    Protocol ModBus RTU
    Board Dimension(LxW)in mm 130x45
    Connector : 3.5mm Pitch Pluggable Connector
    Wireless Communication ENOCEAN-868MHz
    Serial Communication Parameters(default)
    Baud Rate 9600 bps
    Data Bits 8
    Parity none
    Flow Control none

    NOTE

    • Power Supply Voltage : 230VAC
    • Power cable is inserted into the Pluggable connector as per the letters printed on the board.
    • Excess stripping of wires will make shorts between two wires. So,strip out only necessary length of wires
  • Arc Detector with Coil Monitoring

    Product Features:

    ARC100 E /ARC100 A

    • Electrical Direct Controls
    • Coil monitoring & Fault indication

    ARC100 A

    • Web Browser Application
    • IoT implementation
    • Timestamp when an Arc is detected
    • RS485 connectivity

    Product Description:

    Applied ARC Detector with Coil Monitoring is designed and developed for the purpose of Detecting an Arc produced in Transformer and also monitoring the health conditions of safety solenoid valve. When an Arc occurs it is immediately detected by ARC100 and after a set duration, the relay output is triggered. ARC100 also monitors a health condition of the safety solenoid coil ensuring at the time of triggering the same function as it should.


    Technical Specifications

    Technical Specification:          Applied Arc Detector with Coil Monitoring
    Supply Voltage +24VDC SMPS
    Current rating +24VDC max @200mA
    Operating Temperature -45 to +60 deg C
    Humidity 20% to 85%
    Analog Input 0 to +3.3V(AI-11ch)
    Switch Input 1
    Digital Output 1 (+24v DC-SV)
    Status LED Indication 11
    Relay Outputs 2
    Relay Current Rating 8A/250VAC, Coil +24VDC
    Board Dimension(LxW) 120x108mm
    Connector 3.5mm Pitch Pluggable
    DIP Switch 4 way
    Serial Communication* RS485
    Protocol* MODBUS RTU
    Ethernet* DHCP

    Trimpot

    SV →   Solenoid valve Reference setting input
    ARC → ARC detector Reference setting input- Default 100mV

    Coil-monitoring Status Indication

    SVO LED 'ON'  → Fault indication,when SVI-2nd pin Voltage>=10mV(-1.6 Ohm) difference from reference I/p SV
    SVO LED 'Toggle'  → when SVI-2nd pin Voltage>=5mV(-0.8 Ohm) difference from reference I/p SV
    SVO LED 'OFF'  → Good Condition,when SVI-2nd pin Voltage<5mV(-0.8 Ohm)difference from reference I/p SV

    NOTE

    • Power Supply Voltage : 230VAC
    • Power cable is inserted into the Pluggable connector as per the letters printed on the board.
    • Excess stripping of wires will make shorts between two wires. So,strip out only necessary length of wires
  • Humidity Sensor

    Product Features:

    • Highest accuracy
    • Excellent protection against pollution
    • Outstanding long term stability
    • low power consumption

    Product Description:

    ASH-100 is mainly used for monitoring the atmospheric temperature,humidity and pressure. All measured and calculated values are available on the RS-485 interface with Modbus RTU protocol.The compact design with M12 connector allows for easy installation and fast replacement of the probe.


    Technical Specifications

    Technical Specification:          Applied Humidity Sensor
    Supply Voltage +10V to +26VDC
    Current rating 5mA(max)
    Operating Temperature -40 °C to +85 °C
    Operating Humidity : 0 % RH to 100 % RH
    Operating Pressuret 300 to 1100 hpa
    Serial Communication RS485
    Response Time 1s
    Protocol ModBus RTU
    Board Dimension(LxW) 72x 8.5
    Absolute Accuracy humidity ± 3 % RH
    Absolute Accuracy Temperature ±1.0 °C
    Absolute Accuracy Pressure ±1.0 hpa
    Humidity Resolution or sensitivity 0.008 % RH
    Temperature Resolution 0.01 °C
    Pressure Resolution 0.18pa
    Casing Type M12 Housing
    Serial Communication Parameters(default)
    Baud Rate 9600 bps
    Data Bits 8
    Parity none
    Flow Control none
    Stop Bits 1

    Modbus RTU Protocol Mapping Details

    • The measures values are saved as 16 bit unsignes integer between 0x27 and 0x2A
    • Values are stores with a scaling of 1:100(eg Temperature = 2550 is equivalent to 25.5 *C

    Protocol Address (Hexa) Protocol Address (Decimal) Parameter Name
    0x27 39 Temperature [*c]
    0x28 40 Humidity [%]
    0x29 41 Pressure High Byte [hpa]
    0x2A 42 Pressure Low Byte [hpa]

    Query to ASH100

    Field Name &embsp;    Example (Hex)
    Slave Address 127(can set from 1 to 127)
    Function 03(Read Holding Register)
    Starting Address High 00
    Starting Address Low 27 (in Hexa)
    Number of data's to read high 00
    Number of data's to read low 04
    CRC Low Byte 00
    CRC High Byte 04
  • Vibration Sensor

    Product Features:

    • Highest accuracy
    • Excellent protection against pollution
    • Outstanding long term stability
    • low power consumption

    Product Description:

    ASH-100 is mainly used for monitoring theASH-100 is mainly used for monitoring the Acceleration, Velocity, Displacement.. All measured and calculated values are available on the RS-485 interface with Modbus RTU protocol.The compact design with M6 connector allows for easy installation and fast replacement of the probe.


    Technical Specifications

    Technical Specification:          Applied Vibration Sensor
    Supply Voltage +10V to +26VDC
    Current rating 5mA(max)
    Operating Temperature -40 °C to +85 °C
    Operating Humidity 0 % RH to 100 % RH
    Serial Communication RS485
    Protocol ModBus RTU
    Acceleration Range ±2g/±4g/±8g/±16g
    Sensitivity 1024/512/256/128 LSB/g
    Board Dimension(LxW) 72x 8.5
    Linearity Error ± 0.5 %
    Mounting Type Case Material: 304 Stainless Steel
    Mounting: M6 -7mm Tap / Mounting Stud extra
    Serial Communication Parameters(default)
    Baud Rate 9600 bps
    Data Bits 8
    Parity none
    Flow Control none
    Stop Bits 1
    Slave_ID 127(from 1 to 127)

    Modbus RTU Protocol Mapping Details

    • The measures values are saved as 16 bit unsignes integer between 0x27 and 0x2A
    • Values are stores with a scaling of 1:100(eg Temperature = 2550 is equivalent to 25.5 *C

    Protocol Address (Hexa) Protocol Address (Decimal) Parameter Name
    0x27 39 X - Axis
    0x28 40 Y - Axis
    0x29 41 Z - Axis
    0x2A 42 Acceleration[g]
    0x2B 42 Dispacement[mm]
    0x2C 44 Velocity[mm/s]

    Query to ASH100

    Field Name &embsp;    Example (Hex)
    Slave Address 01(varies form 1 t0 255)
    Function 03(Read Holding Register)
    Starting Address High 00
    Starting Address Low 27 (in Hexa)
    Number of data's to read high 00
    Number of data's to read low 06
    CRC Low Byte 00
    CRC High Byte 04
  • 4 Touch Keypad Module

    Product Features:

    • Electrical direct controls using Relays
    • Smooth touch experience
    • RS485 connectivity
    • Load can be controlled by mobile application.
    • User can choose UPS connections to the particular load,
    remainingload works under EB
    • Coil Voltage : 12VDC

    Product Description:

    Applied Touch Keypad is designed & developed for operating multiple loads such as Lights ,fans & motors etc., which helps to replaces the existing mechanical electrical switches. ATK04 is capable of being controlled by AIOHA controllers through Rs485/wireless enocean alliance .


    Technical Specifications

    Technical Specification:          Applied 4 Touch Keypad Module
    Power Supply Voltage 100-240VAC Universal input, 50hz
    Operating Temperature 0 to +60 deg C
    Humidity 20% to 85%C
    Capacitive Sensing Key Input 4
    Capacitive Sensing Diameter 10mm
    Distance between two Touch key 27mm
    Acknowledgment LED 1(for both transmit& receive)
    Status LED 4
    Relay Outputs 4
    Relay Current Rating 8A/250VAC
    Resistive Loads Tungsten & Halogen light 500W
    Capacitive Loads LED & CFL 100W
    Inductive Loads Fan & Motor 65W
    Board Dimension(LxW) in mm 90x45
    Connector 3.5mm Pitch Pluggable Connector
    Wired Communication RS485
    Wireless Communication ENOCEAN-868MHz
    Mounting Type 4 Touch keypad
    Legrand Arteor 575731 4M Pearl Aluminium Plate with
    Legrand FLUSH BOX MODULE(Part.no.6890 09)
    Serial Communication Parameters(default)
    Baud Rate 9600 bps
    Data Bits 8
    Parity none
    Flow Control none

    NOTE

    • Power Supply Voltage : 230VAC
    • Power cable is inserted into the Pluggable connector as per the letters printed on the board.
    • Excess stripping of wires will make shorts between two wires. So,strip out only necessary length of wires.
  • 8 Touch Keypad Module

    Product Features:

    • Electrical direct controls using Relays
    • RS485 connectivity
    • Load can be controlled by mobile application.
    • User can choose UPS connections to the particular load,
    remainingload works under EB
    • Coil Voltage : 12VDC

    Product Description:

    Applied Touch Keypad is designed & developed for operating multiple loads such as Lights ,fans & motors etc., which helps to replaces the existing mechanical/electrical switches. ATK04 is capable of being controlled by AIOHA controllers through Rs485/wireless enocean alliance.


    Technical Specifications

    Technical Specification:          Applied 8 Touch Keypad Module
    Power Supply Voltage 100-240VAC Universal input, 50hz
    Operating Temperature 0 to +60 deg C
    Humidity 20% to 85%C
    Capacitive Sensing Key Input 8
    Capacitive Sensing Diameter 10mm
    Distance between two Touch key 27mm
    Acknowledgment LED 1(for both transmit& receive)
    Status LED 8
    Relay Outputs 8
    Relay Current Rating 8A/250VAC
    Resistive Loads Tungsten & Halogen light 500W
    Capacitive Loads LED & CFL 100W
    Inductive Loads Fan & Motor 65W
    Board Dimension(LxW) in mm 135x45
    Connector 3.5mm Pitch Pluggable Connector
    Wired Communication RS485
    Wireless Communication ENOCEAN-868MHz
    Mounting Type 4 Touch keypad
    Legrand Arteor 575731 4M Pearl Aluminium Plate with
    Legrand FLUSH BOX MODULE(Part.no.6890 09)
    Serial Communication Parameters(default)
    Baud Rate 9600 bps
    Data Bits 8
    Parity none
    Flow Control none

    NOTE

    • Power Supply Voltage : 230VAC
    • Power cable is inserted into the Pluggable connector as per the letters printed on the board.
    • Excess stripping of wires will make shorts between two wires. So,strip out only necessary length of wires.
  • Transformer Dryout System

    Product Features

    • Electrical direct controls using Relays
    • Backup the parameters using Supercapacitor, when power is turned off
    • Web browser application
    • Ethernet speed: 10Mbps
    • RS232 Conncectivity

    Product Description

    Transformer Dryout System is designed and developed to provide a cost effective and convenient method of maintaining transformers in a dry condition. TDS will work on pre-programmed schedule and automatically triggers itself for operation using preset timers, input/output control relays.

    Optional Features on Request

    • IIoT
    • BRS485 connectivity

    Technical Specifications

    Technical Specification          Applied Transformer Dryout System
    Supply Voltage +24VDC SMPS
    Current rating +24VDC max @200mA
    Operating Temperature -45 to +60 deg C
    Humidity 20% to 85%
    Analog Input 4-20mA(4 Channel)
    Reset Switch 1
    Digital Output 3 (+24v DC)
    Digital Outputs 10
    Power Backup Super capacitor
    Load 1 PUMP
    Load 2 EV1
    Load 3 EV2
    Load 4 EV3
    Load 5 EV4
    Load 6 EV5
    Load 7 EV6
    Protocol TCP/IP Modbus
    Board Dimension(LxW) 120x108mm
    Connector 5.08mm Pitch Pluggable Connector
    2.54mm Pitch 16PIN FRC
    2.54mm Pitch 34(17x2)PIN Bergstrip
  • Tapchanger Filter System

    Product Features:

    • Electrical direct controls using Relays
    • Backup the parameters using Supercapacitor, when power is turned off
    • Web browser application
    • Ethernet speed: 10Mbps

    Optional Features on Request:

    • IIoT
    • RS485 connectivity

    Product Description:

    Tapchanger Filter System is designed and developed to operate on an energized Transformer’s OLTC to remove moisture and carbon particles from it. TFS will work on pre-programmed schedule or on the preset tap changes and automatically triggers itself for operation using preset timers, input/output control relays.


    Technical Specifications

    Technical Specification:          Applied Tapchanger Filter System
    Supply Voltage +24VDC SMPS
    Current rating +24VDC max @200mA
    Operating Temperature -45 to +60 deg C
    Humidity 20% to 85%
    Analog Input 0.5V to 4.5V
    Switch Input 3
    Reset Switch 1
    Digital Intput 2 (+24v DC)
    Digital Outputs 4
    PStatus LED Indication 7
    Relay Outputs 4
    Relay Current Rating 8A/250VAC, Coil +24VDC
    Power Backup Super capacitor
    Load 1 Gear Pump Relay
    Load 2 FeedBack Gear Pump Relay
    Load 3 OLR
    Load 4 Particulate Relay
    Board Dimension(LxW) 120x108mm
    Connector 5.08mm Pitch Pluggable Connector
    2.54mm Pitch 16PIN FRC
    2.54mm Pitch 34(17x2)PIN Bergstrip
  • Terrier
  • Terrier + GPRS
  • Terrier + WIFI
  • BEAGLE HL
  • Relay Module – 12 Channel x 10A Each
  • Breather Controller With TimeStamp Datalog
  • Communication Module – RS232C to IEC61850 Converter
  • Applied Photo Diode
  • RS485 Relay Module- 4 Way
  • RS485 Relay Module- 8 Way
  • Arc Detector with Coil Monitoring
  • Humidity Sensor
  • Vibration Sensor
  • 4 Touch Keypad Module
  • 8 Touch Keypad Module
  • Transformer Dryout System
  • Tapchanger Filter System

Who we are

Applied Automation is a product engineering services organization focused on developing Internet of Things (IoT) enabled products and solutions for the smart connected world & to provide quality process automation systems for the various industries.

What we do

Terrier is our newly launched product. It is an IIoT controller which is designed and developed to transmit the data via internet (Ethernet-TCP/IP) to a cloud server. It can also be connect to a PLC’s over Modbus TCP/IP.

Features

Input Output

● Digital IO’s

● Analog IO’s

● Ethernet TCP / IP

● Modbus RTU

● RS232 / RS485

● Modbus TCP / IP

Cloud

● Uses Wired / Wififor     communication

● Sync data to cloud server

● Easy to Configure & Deploy via Web Browser

Applications

● Cloud based Remote Monitoring & Control

● Possibility of integration with HMI

● Web based solutions